The On-Target Steering System (OTS)

The On-Target Guidance System (OTS) is designed to work with any hole drilling system from 8" to 60" in diameter. Al-Hassan office is distinguished by having two devices: The first device: American-made, it is one of the 3 largest devices in the Middle East, with a capacity of 6000 pascals, equivalent to 600 tons and starts from 20 inches to 60 inches in diameter. The device model is 2017. The second device: It has a capacity Pay 150 tons and start from 8 inches in diameter to 40 inches.

discover equipment

Features & Benefits

01

ONE PASS INSTALL

Installs on-grade/on-line casings in one pass compared to the multiple passes required with pilot tube guided boring.

02

Bentonite Injection Port

A means to pump bentonite around the steering head and casing, to reduce friction, as the pipe goes through the ground.

03

On-Line, On-Grade Pipe

The OTS heads are designed to complete crossings on-line and grade in many ground conditions including sand, clay, shale, above or below the water table.

some info about equipment

Specifications

WEIGHT 2800 lb (1270.1 kg)
WIDTH 32″ (81.3 cm)
LENGTH 95” (241.3 cm)
HEIGHT 78” (198.1 cm)
HOSE LENGTH 400’ (121.9 m)
HYDRAULIC PRESSURE 6500 psi (448.1 bar)
WATER PUMP 1/4 hp (.2 kW)
WATER CAPACITY 50 gal (189.3 L)
BATTERY 12 volt for alignment lights
POWER SOURCE REQUIRED 120 volt

STEERING HEAD DIAMETER AND WEIGHT

16" (40.6 CM) 1200 lb (544.3 kg)*
24" (60 CM) 2300 lb (1043.3 kg)
30" (76.2 CM) 4200 lb (1905.1 kg)
36" (91.4 CM) 5300 lb (2404 kg)
42" (106.7 CM) 6200 lb (2812.3 kg)*
48" (121.9 CM) 7000 lb (3175.1 kg)*
60" (152.4 CM) 8700 lb (3946.3 kg)*
whatsapp